Filter
Top Products
Dell Printer Configuration Web Tool 133
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After
executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
Va lue s:
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE: Using non-Dell-brand toner cartridges may make some printer features
unusable, reduce print quality and decrease the reliability of your printer. Dell
recommends only new Dell-brand toner cartridges for your printer. Dell does not
provide warranty coverage for problems caused by using accessories, parts, or
components not supplied by Dell.
NOTE: Before you use toner cartridge of another manufacturer, be sure to restart
the printer.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Ghost Click Start to print a chart to check for ghost printing.
4Colors Click Start to print bands of yellow, magenta, cyan, and black with
varying density.
Alignment Click Start to print a chart, and then check for proper alignment of
the print image on the paper.
Drum Refresh Click Start to print a chart to check the light fatigue of the drum
cartridge.
Reset Defaults
and restart
printer.
Click Start to initialize the system parameters.