Filter
Top Products
292 Troubleshooting
Random spots/Blurred images
Action Yes No
1 The print media surface may be uneven. Try
changing the Paper Type setting in the printer
driver. For example, change the plain paper to
thick.
1
On the
Paper/Output tab in Printing
Preferences of the printer driver, change the
Paper Type setting.
Is the problem recovered?
The task is
complete.
Go to action 2.
2 Verify that the correct print media is being
used. See "Supported Paper Sizes" on page 162.
If not, use the print media recommended for
the printer.
Is the problem recovered?
The task is
complete.
Go to action 3.
3 Adjust the fuser temperature.
1
Launch the Tool Box, click
Adjust Fuser
on
the
Printer Maintenance
tab.
2
Adjust the fixing temperature by turning up
the value for your printing media.
3
Click
Apply New Settings
.
4
Click close box to exit Tool Box.
Is the problem recovered?
The task is
complete.
Contact Dell.