Filter
Top Products
DIP Switch Settings and Connectors 123
Server Module Board Connectors
See Figure 6-3 and Table 6-1 for the location and description of the server module board connectors.
Table 6-1. Server-Module DIP Switch Settings
DIP Switch Setting Description
PWRD_EN
(Switch 1)
(default) The password feature is enabled when switch 1 is set to "on."
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
(Switch 2)
(default) The configuration settings in NVRAM are retained at system
boot when switch 2 is set to "off."
The configuration settings in NVRAM are cleared at next
system boot when switch 2 is set to "on."
"on" "off"