Filter
Top Products
About Your System 39
Plug & Play Configuration
Error
Error encountered in initializing PCI
device; faulty server module board.
Set the NVRAM_CLR switch to "on"
and reboot the server module. See
Figure 6-2 for switch location.
Check for a BIOS update. If the problem
persists, see "Getting Help" on page 127.
Read fault Faulty diskette, diskette drive, optical
drive, or hard drive.
Replace the diskette. Ensure that the
custom cable is properly connected. See
"Troubleshooting USB Devices" on
page 105 or "Troubleshooting Hard
Drives" on page 113. for the appropriate
drive(s) installed in your system.
Remote Configuration
update attempt failed
Server module could not implement
Remote Configuration request.
Retry Remote Configuration.
Sector not found
Seek error
Seek operation failed
Faulty diskette or hard drive. Replace the diskette. If the problem
persists, see "Troubleshooting Hard
Drives" on page 113 for the appropriate
drive installed in your system.
Shutdown failure Shutdown test failure. Ensure that all memory modules are
properly installed. See "Troubleshooting
Server Module Memory" on page 112. If
the problem persists, see "Getting Help"
on page 127.
Spare bank enabled Memory sparing enabled. Information only.
The amount of system
memory has changed.
Faulty memory module. See "Troubleshooting Server Module
Memory" on page 112. If the problem
persists, see "Getting Help" on page 127.
Information only, if you have changed
the memory configuration.
Time-of-day clock stopped Faulty battery; faulty server module
board.
See "Troubleshooting Server Module
Memory" on page 112. If the problem
persists, see "Getting Help" on page 127.
Time-of-day not set -
please run SETUP program
Incorrect Time or Date settings; faulty
server module board battery.
Check the Time and Date settings. See
"Using the System Setup Program" on
page 43. If the problem persists, see
"Troubleshooting the Server Module
Battery" on page 115.
Timer chip counter 2
failed
Faulty server module board. See "Getting Help" on page 127.
Table 1-13. Server Module Messages (continued)
Message Causes Corrective Actions