Filter
Top Products
Subtab: Intrusion
Under the Properties tab, you can view the chassis intrusion status.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View the current alert actions settings and set the alert actions that you want to be performed in the
event that the intrusion sensor returns a warning or failure value.
• View the current SNMP trap alert thresholds and set the alert threshold levels for the intrusion sensor.
The selected traps are triggered if the system generates a corresponding event at the selected severity
level.
Memory
Click the Memory object to manage your system's memory devices. Server Administrator monitors the
memory device status for each memory module present in the monitored system. Memory device
prefailure sensors monitor memory modules by counting the number of ECC memory corrections.
Server Administrator also monitors memory redundancy information if your system supports this feature.
The Memory object action window can have the following tabs, depending on the user's group
privileges: Properties and Alert Management.
Properties
Subtab: Memory
Under the Properties tab, you can view the memory redundancy status, memory array attributes, total
capacity of the memory arrays, details of memory arrays, memory device details, and memory device
status. The memory device details provides the details of a memory device on a connector such as the
status, device name, size, type, speed, rank, and failures. A rank is a row of dynamic random access
memory (DRAM) devices comprising 64 bits of data per Dual Inline Memory Module (DIMM). The possible
values of rank are single, dual, quad, octal, and hexa. The rank displays the rank of the DIMM
and helps in the easy service of DIMMs on the server.
NOTE: If a system with spare bank memory enabled enters a redundancy lost state, it may not be
apparent which memory module is the cause. If you cannot determine which DIMM to replace, see
the switch to spare memory bank detected log entry in the ESM system log to find which memory
module failed.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View the current alert actions settings and set the alert actions that you want to be performed in the
event that a memory module returns a warning or failure value.
52