Filter
Top Products
Under the Properties tab, you can view information about your system's microprocessor(s) and access
detailed capabilities and cache information.
Alert Management
Subtabs: Alert Actions
Under the Alert Management tab, you can view current alert actions settings and set the alert actions that
you want to be performed in the event that a processor returns a warning or failure value.
Remote Access
Click the Remote Access object to manage the Baseboard Management Controller (BMC) or Integrated
Dell Remote Access Controller (iDRAC) features and Remote Access Controller features.
Selecting Remote Access tab allows you to manage the BMC/iDRAC features such as, general
information on the BMC/iDRAC. You can also manage the configuration of the BMC/iDRAC on a local
area network (LAN), serial port for the BMC/iDRAC, terminal mode settings for the serial port, BMC/iDRAC
on a serial over LAN connection, and BMC/iDRAC users.
NOTE: If an application other than Server Administrator is used to configure the BMC/iDRAC while
Server Administrator is running, the BMC/iDRAC configuration data displayed by Server
Administrator may become asynchronous with the BMC/iDRAC. It is recommended that Server
Administrator be used to configure the BMC/iDRAC while Server Administrator is running.
DRAC allows you to access your system's remote system management capabilities. The Server
Administrator DRAC provides remote access to inoperable systems, alert notification when a system is
down, and the ability to restart a system.
The Remote Access object action window can have the following tabs, depending on the user's group
privileges:Properties, Configuration, and Users.
Subtab: Information
Properties
Under the Properties tab, you can view general information on the remote access device. You can also
view the attributes of the IPv4 and IPv6 addresses.
Click Reset to Defaults to reset all the attributes to their system default values.
Subtabs: LAN | Serial Port | Serial Over LAN | Additional Configuration
Configuration
Under the Configuration tab when BMC/iDRAC is configured, you can configure the BMC/iDRAC on a
LAN, serial port for BMC/iDRAC, and BMC/iDRAC on a serial over LAN connection.
NOTE: The Additional configuration tab is available only on systems with iDRAC.
Under the Configuration tab, when DRAC is configured, you can configure network properties.
Under the Additional Configuration tab you can either enable or disable IPv4/IPv6 properties.
56