Filter
Top Products
support.dell.com System Setup Program B-9
Onboard Peripherals Screen
Figure B-6. Onboard Peripherals Screen Menu
Table B-7. Onboard Peripherals Screen Menu Options
Option Function
Serial Port Configures the serial port. Set this option to Enabled
(default) or Disabled. If set to Enabled, you can set the fol-
lowing additional options:
Base Address Available base I/O addresses are 3F8h (default), 3E8h, 2F8h,
and 2E8h.
IRQ Available interrupts are 4 (default) and 3.
Parallel Port Configures the parallel port. Set this option to Enabled
(default) or Disabled. Depending on the port setting, you can
set the following additional options:
Base Address If port is set to Enabled, available base I/O addresses are
378h (default) and 278h.
NOTE: The Glossary in the system Help defines abbreviations and acronyms.