Filter
Top Products
6. Install the new system battery.
a. Support the battery connector by pressing down firmly on the positive side of the connector.
b. Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
c. Press the battery straight down into the connector until it snaps into place.
7. Perform the procedure After Working on Your Computer.
8. Enter system setup (see the Dell
™
Technology Guide) and restore the settings you recorded in step1.
9. Properly dispose of the old battery as described in the safety information that shipped with your computer.
Back to Contents Page
1
system battery
2
positive side of battery connector
3
battery socket tab
4
battery socket