Filter
Top Products
Dell
™
Latitude™ E6400 XFR Service Manual
Page 23
NOTE: No snaps are used to attach the bottom access panel to the base. There is a gasket
attached to the perimeter of the bottom access panel, and this gasket might provide some
resistance during removal.
1 M2.5 x 5mm screws (21) 2 Bottom of computer
3 Battery release slider latches (2)
4.2 Replacing the Bottom Access Panel
1. Position the Bottom Access Panel into place.
NOTE: Ensure the battery release slider latches on the bottom access panel are in their locked
positions. See photo below for correct slider latches positions.
Battery release latches in locked position
1. Replace and tighten the twenty-one M2.5 x 5-mm screws in the sequence identified below.
1
2
3