Filter
Top Products
Removing and Replacing Parts on the OptiPlex NX1 Net PC Chassis 7-7
+DUG'LVN'ULYH
)LJXUH+DUG'LVN'ULYH5HPRYDO
To remove a hard-disk drive, follow these steps:
1. Disconnect the DC power cable and the EIDE cable from the back of the
drive.
2. Disconnect any external cables from the expansion card if one is installed.
3. Remove the expansion-card cage.
4. Remove the expansion card, if one is installed.
5. Remove the four hard-disk drive mounting screws that attach the hard-disk
drive to the expansion-card cage.
hard-disk drive
mounting screws (4)
hard-disk drive
expansion-card cage