Filter
Top Products
Removing and Replacing Parts: Dell Inspiron 4100
2. Replace the two M2.5 x 5-mm screws and the two M1.7 x 3.5-mm screws that secure the
display latch and bracket to the top cover.
Hinge Covers
Removing the Hinge Covers
1. Remove the display assembly.
2. Rotate the hinges forward at an angle of approximately 90 degrees to the front of the display
assembly.
3. To remove the hinge covers, slide them off the hinges.
Replacing the Hinge Covers
1. Attach the display assembly to the bottom case.
2. Close the display assembly.
3. Snap the hinge covers in place over the hinges.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (31 of 52)6/21/2004 1:02:31 AM