Filter
Top Products
Removing and Replacing Parts: Dell Inspiron 4100
1 M2.5 x 12-mm screws (3)
2 M2 x 3-mm screws (2)
3 hard-drive bay door
5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay door labeled "circle
P."
6. Turn the computer over, and remove the three M2 x 3-mm screws that secure the palm rest to
the bottom case:
a. Remove the two M2 x 3-mm screws that are located on the back edge of the bottom
case, underneath the display assembly.
b. Remove the M2 x 3-mm screw located underneath the keyboard, on the right side of the
bottom case, next to the microprocessor thermal cooling assembly.
7. Pull up on the pull-tab that is attached to the palm-rest flex cable connector to remove it from
the interface connector on the system board.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (34 of 52)6/21/2004 1:02:31 AM