Removing and Replacing Parts: Dell Inspiron 4100
3. Use your fingers to release the cover completely, and remove it.
4. To replace the display cover, bend it slightly to insert the four tabs on the rounded edge of the
cover into the slots on the top of the computer.
5. Press the cover along the straight edge at the back of the computer until it snaps into place.
6. Firmly press the Dell™ logo until it snaps into place. Press above both hinge covers to engage
the final snaps.
Hard Drive Assembly
Removing the Hard Drive
1. Save and close any open files, exit any open programs, and shut down the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: The hard drive is very sensitive to shock. Handle the hard drive by its edges (do not
squeeze the top of the hard drive case), and avoid dropping it.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (10 of 52)6/21/2004 1:02:31 AM