Filter
Top Products
Removing and Replacing Parts: Dell Inspiron 4100
1 right hinge cover
2 left hinge cover
Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following
procedure.
1. Remove the hard drive.
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the display
hinges pass through the back of the palm rest.
3. Remove the display assembly and hinge covers.
4. Turn the computer over and remove the three M2.5 x 12-mm screws labeled "circle P."
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (33 of 52)6/21/2004 1:02:31 AM