Filter
Top Products
56 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
2 Pull the device by the latch release to remove the device from the
module bay.
3 Insert the new device into the bay, push the device until you feel a
click, and push the device latch release in so that it is flush with the
computer.
If the Device Screw Is Installed
1 Save and close any open files, exit any open programs, and then shut
down the computer.
2 If the computer is connected to a docking device (docked), undock it.
See the documentation that came with your docking device for
instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when
they are not installed in the computer. Avoid pressing down on them or placing
heavy objects on top of them.
3
Close the display and turn the computer over.