Filter
Top Products
58 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
NOTICE: Insert devices into the module bay before you dock and turn on the
computer.
7
Insert the new device into the bay, push the device until you feel a
click, and push the device latch release in so that it is flush with the
computer.
8 Replace the device screw.
9 Turn on the computer.
Removing and Installing Devices While
the Computer Is Running
NOTE: If the device
screw is not installed, you
can remove and install
devices while the
computer is running and
connected to a docking
device (docked).
Your computer ships with an optical drive installed in the module bay.
However, the device screw is not installed in the optical drive but packaged
separately. When you install your device in the module bay, you can install
the device screw.
NOTE: You do not need
to install the device screw
unless you want to secure
the module inside the
computer for security
purposes.
If the Device Screw Is Not Installed
1 Double-click the Safely Remove Hardware icon on the taskbar.
2 Click Stop and wait for the operating system to confirm that the
device has stopped.
3 Click the device you want to eject.
NOTICE: To prevent damage to devices, place them in a safe, dry place when
they are not installed in the computer. Avoid pressing down on them or placing
heavy objects on top of them.