Filter
Top Products
684 Configuring VLANs
automatically configured as a member of all VLANs. You can remove them
from membership in specific VLANs. By default, the native VLAN for a trunk
port is VLAN 1.
Command Purpose
configure Enter global configuration mode.
interface
interface
Enter interface configuration mode for the specified
interface. The
interface
variable includes the interface type
and number, for example tengigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
switchport mode trunk Configure the interface as a tagged layer 2 VLAN interface.