Filter
Top Products
Adding and Replacing Parts 113
Subwoofer
CAUTION: Before you begin this procedure, read the safety instructions at the front of this document
(see page 11).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
If you ordered a subwoofer with your computer, it is already installed. To remove and replace a
subwoofer:
1
Follow the procedures in "Before You Begin" (see page 103).
2
Remove the battery (see page 52).
3
Remove the subwoofer from the battery:
a
Disconnect the subwoofer cable.
b
Apply a small screwdriver or scribe to the notch in the side of the battery, releasing the
subwoofer from the compartment in the battery.
subwoofer
battery
subwoofer cable
connector
cable
notch