Filter
Top Products
Using the Keyboard and Touch Pad 63
Customizing the Touch Pad and Track Stick
You can use the
Mouse Properties
window to disable the touch pad and track stick or adjust their
settings.
1 Click the Start button, click Control Panel, click Printers and Other Hardware, and then
click
Mouse
.
2
In the
Mouse Properties
window:
• Click the
Device Select
tab to disable the touch pad and track stick.
• Click the
Pointer
tab to adjust touch pad and track stick settings.
3
Select the desired settings and click
Apply
.
4
Click
OK
to save the settings and close the window.
Changing the Track Stick Cap
You can replace your track stick cap if it wears down from prolonged use. You can purchase
additional caps by visiting the Dell website at
www.dell.com
.
1
Pull the cap off the track stick.
2
Align the new cap over the square track-stick post and gently press the cap down onto the post.
NOTICE: The track stick can damage the display if it is not properly seated on the post.
3
Test the track stick to ensure that the cap is seated properly.