Filter
Top Products
158
range of IP addresses.
Source Port : You can control requests for using a specific application by
entering its port number here. Users can either set a single port
number or a range of port numbers.
Destination Port : This parameter determines the application from the specified
destination port. Users can either set a single port number or a
range of port numbers.
Check Options : This parameter refers to the options in the packet header. The
available selection options are abbreviated as follows:
SEC – Security
LSRR – Loose Source Routing
Timestamp – Timestamp
RR – Record Route
SID – Stream Identifier
SSRR – Strict Source Routing
RA – Router Alert
Check TTL : This parameter would let you screen packets according to their
Time-To-Live (TTL) value available options are:
1. Equal
2. Less than
3. Greater than
4. Not equal