51
NOTE
If no MAC address is entered, the Antenna Alignment tool will
make use of the SSID to align the antenna. Please make sure that
the correct SSID is entered. If more than one access point (AP)
share the same SSID, the Antenna Alignment tool will show the
strongest signal AP.
The DIAG LED indicates the signal strength as described below:
Signal Strength
(RSSI Value)
Status of DIAG LED
Above 20 Stays turned ON
Between 19 and 17 Flashes 6 times
Between 17 and 14 Flashes 3 times
Between 13 and 10 Flashes ONCE
Below 10 Turns OFF
NOTE
The signal strength of below RSSI of 10 is not recommended for
outdoor long distance connection.
!
NOTE: To ensure proper functionality of the device, select to
Stop after performing antenna alignment.
Alternatively, you may also reboot the device.