Filter
Top Products
T1 Modem Bank
106
&G
n
Guard Tone Operation
Determines which guard tone, if any, to transmit while transmitting in the high band (answer mode). Used
only in V.22 and V.22bis mode.
* &G0: No guard tones.
&G1: 550 Hz guard tone.
&G2: 1800 Hz guard tone.
Result Codes:
OK Returned when
n
= 0, 1 or 2.
ERROR Returned for any other value of
n
.
&J
n
Dummy Command for AutoSync
Dummy command for AutoSync compatibility.
&J0: Returns OK.
&J1: Returns OK.
&K
n
Set Flow Control
Determines which guard tone, if any, to transmit while transmitting in the high band (answer mode). Used
only in V.22 and V.22bis mode.
&K0: Disable flow control.
&K1: Reserved.
&K2: Reserved.
* &K3: Enable bi-directional hardware flow control (RTS/CTS).
&K4: Enable bi-directional XON/XOFF flow control.
&K5: Error.
Result Codes:
OK Returned when
n
= 0, 3 or 4.
ERROR Returned for any other value of
n
.
&L
n
Dial-Up/Leased-Line Option
Selects between dial-up and leased-line operations. NOTE: Full-featured leased line operation is not
available at this time. Please call Digi Sales for more information.
* &L0: Dial line.
&L1: Leased line.
Result Codes:
OK Returned when
n
= 0 or 1.
ERROR Returned for any other value of
n
.