Filter
Top Products
Appendix F 147
56 CARRIER 24000
The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and
carrier reporting has been enabled.
57 CARRIER 26400
The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and
carrier reporting has been enabled.
58 CARRIER 28800
The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and
carrier reporting has been enabled.
59 CARRIER 31200
The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and
carrier reporting has been enabled.
60 CARRIER 33600
The modem sends this result code when the channel carrier in V.34 mode has been detected on the line, and
carrier reporting has been enabled.
66 COMPRESSION: CLASS 5
This message is sent to the DTE when the modem has connected in MNP Class 5, and COMPRESSION
message reporting has been enabled.
67 COMPRESSION: V.42bis
This message is sent to the DTE when the modem has connected in V.42bis data compression, and
COMPRESSION message reporting has been enabled.
69 COMPRESSION: NONE
This message is sent to the DTE when the modem has connected without data compression, and
COMPRESSION message reporting has been enabled.
70 PROTOCOL: NONE
This message is sent to the DTE when the modem has connected without any form of error correction, and the
PROTOCOL message reporting has been enabled.
77 PROTOCOL: LAP-M
This message is sent to the DTE when the modem has connected in the V.42 LAPM mode of error correction,
and PROTOCOL message reporting has been enabled.
80 PROTOCOL:
MNP
This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and
PROTOCOL message reporting has been enabled.
81 PROTOCOL:
MNP
2
This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and
PROTOCOL message reporting has been enabled.
82 PROTOCOL:
MNP
3
This message is sent to the DTE when the modem has connected in the MNP mode of error correction, and
PROTOCOL message reporting has been enabled.