Filter
Top Products
Appendix F 121
+FBOR Data Bit Order Selection.
Command syntax: +FBOR=<value>
0: Direct bit order for both Phase C data and Phase B/D data.
1: Reversed bit order for Phase C data and direct bit order for Phase B/D data.
2: Direct bit order for Phase C data and reversed bit order for Phase B/D data.
3: Reversed bit order for both Phase C data and for Phase B/D data.
Note:
Direct bit order: First bit transferred of each byte on the DTE-DCE link is the first bit transferred
in the PSTN data carrier.
Reversed bit order: Last bit transferred of each byte on the DTE-DCE link is the first bit transferred
in the PSTN data carrier.
+FCQ Copy Quality Checking
Command syntax: +FCQ=<value>
0: Disables copy quality checking. The modem will generate Copy Quality OK (MCF) responses to
complete pages and set +FPTS=1.
+FCR Capability to Receive
Command syntax: +FCR=<value>
0: Indicates the modem will not receive message data.
1: Indicates the modem can receive message data.
+FCTCRTY ECM Retry Count
Command syntax: +FCTCRTY=<value>
0: Disable error correcting mode retries. Error correcting mode is not supported.