Filter
Top Products
Appendix F 113
\J
n
Constant DTE Speed Option
* \J0: DCE and DTE rates are independent.
\J1: DTE rate adjusts to DCE connection rate after online.
Result Codes:
OK Returned when
n
= 0 or 1.
ERROR Returned for any other value of
n
.
\K
n
Set Break Control
Selects the way in which the modem handles a break signal. The Modem Xem can handle a break in one of
three ways: expedited destructive, expedited, or queued break.
In online data mode with V.42 protocol or normal mode, then break signal to DTE through EIA-232,
0, 2, 4: Enter online command mode but do not send break to remote modem.
1: Empty the data buffers and send break to the remote modem immediately.
3: Immediately send break to the remote modem.
*5: Send break to the remote modem in sequence with data.
In online data mode with direct mode, then receive break at serial port,
0, 2, 4: Immediately send break and enter online command state.
1, 3, *5: Immediately send break through.
In online command mode with V.42 protocol or normal mode, and the DTE issues a transmit break
command,
0, 1: Empty the data buffers and send break to the remote modem.
2, 3: Immediately send break to the remote modem.
4, *5: Send break to the remote modem in sequence with data.
In online data mode with normal mode, receive break signal from remote at modem port, send to serial
port,
0, 1: Empty the data buffers and send break to the local DTE.
2, 3: Immediately send break to the local DTE.
4, *5: Send break to the local DTE in sequence with data.
Result Codes:
OK Returned when
n
= 0, 1, 2, 3, 4 or 5.
ERROR Returned for any other value of
n
.