D-Link DI-624S Network Router User Manual


 
13
Using the Configuration Wizard
Whenever you want to configure your
network or the DI-624S, you can
access the Configuration Menu by
opening the web-browser and typing in
the IP Address of the DI-624S. The
DI-624S default IP Address is shown
to the right:
Open the web browser
Type in the IP Address of the
Router (http://192.168.0.1
)
Type admin in the User Name
field
Leave the Password blank
Click OK
The Home > Wizard screen will appear.
Please refer to the Quick Installation
Guide for more information regarding the
Setup Wizard.
These buttons appear on most of the
configuration screens in this section.
Please click on the appropriate button at
the bottom of each screen after you have
made a configuration change.
Note: if you have changed the default IP
Address assigned to the DI-624S, make
sure to enter the correct IP Address.
192.168.0.1
Clicking this button will save configured
settings to the router.
Clicking Cancel will clear changes made to
the current page.
Clicking Help will provide the user with
helpful information about the current
window.
Click refresh will refresh the statistics of the
current window.