28
Advanced > File Sharing > Server Setup
Server Setup Click the corresponding radio button if you wish to enable or
disable the File Server function on the Router.
Group Enter the name of the share group on the internal network
with whom you wish to share files.
Name Enter the name of the device to be used as the file sharing
server. As shown in the window above, this should be the
DI-624S.
Share type The administrator has two choices of places where to share
files. If “All USB Disk without authentication” is chosen, the
administrator will allow outside users access to USB devices
attached to the router, without the need for authentication.
“Configured User and Directory” will require outside users
to be authenticated by the router before gaining access. The
administrator will need to pre-define user names and
passwords for these users attempting to access the shared
files.
Advanced > File Sharing > User Setup
The Server Setup window is used to
configure the router to be a file-sharing
device on the network.
The User Setup window is used to
configure users on the network to
gain access to the router. To gain
access to this window, the user
must first choose the “Configured
User and Directory” setting and
click Apply. Once returned to the
screen, the user may choose this
option to be configured. Properly
configured users will be listed in the
User Lists table at the bottom of the
window. Up to 32 users can be
configured here. To edit the
parameters for a configured user
click its corresponding edit icon. To
delete the user, click the
corresponding delete icon.