Filter
Top Products
21
Clone MAC Address
The default MAC address is set to the WAN’s physical interface MAC
address on the Broadband Router. You can use the “Clone MAC
Address” button to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with the
MAC address of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Primary
DNS Address
Input the primary DNS (Domain Name Server) IP address provided by
your ISP
Secondary
DNS Address
This is an optional DNS Address entry to be used if the primary DNS
fails.
Maximum Idle Time The amount of time of inactivity before the device will disconnect time
your PPPoE session. Enter a Maximum Idle Time (in minutes) to define
a maximum period of time for which the Internet connection is
maintained during inactivity. If the connection is inactive for longer than
the defined Maximum Idle Time, then the connect ion will be dropped.
Either set the value for idle time to zero or enable Auto-reconnect to
disable this feature.
MTU Enter an MTU value only if required by your ISP. Otherwise, leave it at
the default setting.
Connect Mode Allows the user to choose a method of connecting to the ISP.
Always-On will keep the router connected through Idle times. Manual
will require the user to connect manually using the router anytime a
connection to the ISP has timed out. Connect-on-demand will instruct
the router to connect to the ISP anytime information is sent from the
connected computer on the LAN.
Click Apply to set any changes made to the memory of the router.