Filter
Top Products
48
Using the Configuration Menu (continued)
Advanced > QoS
QoS or Quality of Service is used to allot bandwidth and priority from the router. To allot
bandwidth per port on the router, click the QoS Bandwidth radio button and configure
the parameters. QoS may be configured per Physical Port, MAC address, IP address
or specified application. See the following explanation for more detailed information on
each type of QoS setting.
Advanced > QoS > Physical Port
To enable QoS per port, first click the Physical Port radio button which will reveal the
preceeding screen for the user to configure. Simply click the Enable check box of the
corresponding port to enable for QoS. You may also set the bandwidth for that port by
using that corresponding pull-down menu. The user may choose a bandwidth between
128 Kbps to 32 Mbps. FULL denotes that the port will have the maximum transfer
speed allowed at any given time, up to 100Mbps. Click Apply to confirm your settings.