Filter
Top Products
54
Using the Configuration Menu (continued)
Tools > Admin
Administrator
admin is the Administrator login name.
Password Enter the password here and the same password in the
Confirm Password field. This will be the password that the
administrator will use to gain access to the configuration
menu of the device. There is no default password for this
device.
User user is the User login name
Password Enter the password here and the same password in the
Confirm Password field. This will be the password that the
users will use to gain access to the configuration menu of the
device. Users will have limited privileges on this device. There
is no default password for this device.
Remote Management
Remote management allows the DI-624 to be configured from
the Internet by a web browser. A username and password is
still required to access the Web-Management interface. In
general, only a member of your network can browse the
built-in web pages to perform Administrator tasks. This
feature enables you to perform Administrator tasks from the
remote (Internet) host.
IP Address The Internet IP address of the computer that has access to
the Broadband Router. If you input an asterisk (*) into this
field, then any computer will be able to access the Router.
Putting an asterisk (*) into this field would present a security
risk and is not recommended.
Port The port number used to access the Broadband Router. The
default port number for web management is 8080.
At this page, the DI-624S
administrator can change the system
password. There are two accounts
that can access the Broadband
Router’s Web-Management interface.
They are admin and user. Admin has
read/write access while user has
read-only access. User can only view
the settings but cannot make any
changes.