Filter
Top Products
20
Using the Configuration Menu (continued)
Home > WAN > PPPoE
PPPoE
Choose this option if your ISP uses PPPoE. (Most DSL users will
select this option.)
Dynamic PPPoE Choose this option to receive an IP Address
automatically from your ISP.
Static PPPoE Choose this option to you have an assigned (static)
IP Address.
Password Enter The PPPoE user name provided to you by your ISP.
Retype Password Retype the password entered in the previous field.
Service Name Enter the Service Name provided by your ISP (optional).
IP Address This option is only available for Static PPPoE. Enter the static IP
address for the PPPoE connection.
MAC Address The default MAC Address is set to the WAN’s physical interface MAC
address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP.
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP
uses a PPPoE connection. Your ISP will provide you with a
username and password. This option is typically used for DSL
services. Select Dynamic PPPoE to obtain an IP address
automatically for your PPPoE connection. Select Static PPPoE to
use a static IP address for
y
our PPPoE connection.