Filter
Top Products
14
Using the Configuration Menu (continued)
Home > Wireless
WCN
WCN or Windows Connect Now Technology is used to automatically
configure the wireless settings for this device. The WCN must be
previously configured on computer running a Windows XP operating
system, which has Service Pack 2 installed. Once the configuration
has been completed by running the Wireless Network Setup Wizard, it
must be saved to a USB enabled memory device and then uploaded
automatically to the router and any other device to be put on this
wireless network, using this method. No configuration will be
necessary except for ensuring that this WCN radio button is enabled
before connecting the memory drive to the router. For a concise
explanation on configuring the WCN on Windows XP, see the
Appendix at the back of this manual.
(Note: For the client
implementation of this function, please see the user manual for
the associated client PC)
Wireless Radio Click the appropriate radio button to enable or disable the Wireless
Access part of this device.