Filter
Top Products
19
Using the Configuration Menu (continued)
Dynamic IP Address
Dynamic
Choose Dynamic IP Address to obtain IP address information
automatically from your ISP. This option should be selected if your ISP
has not supplied you with an IP address.
This option is commonly used
for Cable modem services.
Host Name
The Host Name is optional but may be required by some ISPs. The
default host name is the device name of the Router and may be
changed.
MAC Address
The default MAC Address is set to the WAN’s physical interface MAC
address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP.
Clone MAC Address The default MAC address is set to the WAN’s physical interface MAC
address on the Broadband Router. You can use the “Clone MAC
Address” button to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with the MAC
address of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Enter a DNS Address if you wish not to use the address provided by
your ISP.
MTU Enter an MTU value only if required by your ISP. Otherwise, leave it at
the default setting.
Primary/Secondary
DNS Address