Dynalink RTA1046VW Network Router User Manual


 
Wireless IAD User Manual
x
ADSL2 Compliance
³ ITU G.992.3 Annex A (G.dmt.bis)
³ Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream
ADSL2+ Compliance
³ ITU G.992.5 Annex A
³ Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream
Wireless LAN Compliance
³ IEEE 802.11g and IEEE 802.11b
³ Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for
802.11b
³ Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for
802.11b; DQPSK (2Mbps) for 802.11b; DBPSK (1 Mbps) for 802.11b
³ Network Architecture: infrastructure
³ Operating Frequency: 2.4 ~ 2.5 GHz
³ Operating Channels: depending on local regulations. For example, 11
Channels (Northern America), 13 Channels (Europe), and 14 Channels (Japan)
³ Support the selection of best quality channel automatically
³ RF Transmitter:
Target Output Power (EIP): 13.5 dBm (22mW) for 802.11g
17.5 dBm (56mW) for 802.11b
Frequency Stability: 10 ppm
TX Spectrum Mask: comply with IEEE802.11 b/g standard
³ RF Receiver
Sensitivity: provide the implemented sensitivity and comply with
IEEE802.11b/g standard
Data Rate (Mbps) Minimum sensitivity (dBm)
6
-86
9
-84
12
-82
18
-80
24
-78
36
-75
48
-70
802.11g
54
-68
802.11b
11
-85
Maximum input power: -10dBm
³ Antenna: One external antenna is provided.
External Antenna: 2.4G~2.5GHz Dipole and Omni radiation antenna with 3 dBi
peak gain
³ Coverage Area: 300 meters
³ Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with