Filter
Top Products
Wireless IAD User Manual
120
SIP Extension
More advanced functions are provided here, these are optional settings. Please
check what you need for the Wireless IAD settings.
Encode SIP option with the User
Agent:
It means the device name will be
conveyed with the packets transmitted
to other places.
The SIP request and response
messages sent by the IAD will be
encoded with the device name of the
user agent.
Encode SIP URI with user=phone
parameter:
A SIP URI can identify a
communication resource. It contains
sufficient information to initiate and
maintain a communication session
with the resource.
Select it if you want the parameter of
user=phone information to be
conveyed with the SIP request and
response messages sent by the IAD.
SIP Register with Expire Time:
When the registered users are
working online, after passing half of
the expired time, the IAD will register
for them automatically.
Please check this item and enter the
expired time for the SIP register. The
range is from 30 to 86400. If you do
not want to invoke this setting, simply
leave it unchecked.
SIP Session Timer Value:
The time that you set here means that
after passing half of the SIP session
timer (e.g., 900 seconds if we enter
1800 here); the IAD will invite the
connection again.
Key in the number of the timer value.
The default setting is 1800 seconds,
which means after 900 seconds, the
IAD will send a message and connect
to the opposite side to ensure the
connection. Be aware that the value
you type here cannot be less than the
Min-SE value. The unit is second.