Dynalink RTA1046VW Network Router User Manual


 
Wireless IAD User Manual
6
q When the complete window of the InstallShield Wizard appears, click
Finish.
r Link your IAD and the PC with a USB cable.
s The system will detect the USB driver automatically. And then, the system
will copy the proper files for this IAD.
Note: If the USB device is not detected automatically, check the USB
cable between the PC and the device. Besides, make sure that the device
is power on.
t When the file copying finished, the dialog above will close. Now the USB
driver is installed properly. You can use the IAD.
To make sure that your IAD is properly installed, please do the following steps.
1. Right-click on My Computer and press Properties.