Filter
Top Products
Wireless IAD User Manual
132
Connect to ACS:
Choose to connect to ACS with or
without SSL (Secure Socket Layer)
protocol according to your ISP.
If the ACS URL starts with http://,
choose without SSL mode; if it begins
with https://, select with SSL.
ACS URL Address:
Key in the Auto-Configuration Server
URL Address provided by the ISP,
e.g.,
http://10.11.95.124:8082/askey/ACSS
erver without SSL or
https://10.11.95.124:8443/askey/ACS
Server with SSL.
ACS User Name/ ACS Password:
When connecting to ACS, this device
must have correct user name and
password for authentication. Key in
the information provided by the ISP.
When the content of ACS URL
Address, User Name, and Password
match the ACS authorization, the IAD
will send an online report to ACS.
Connection Request User
Name/Password:
If the ACS wants to communicate with
the device, it will have to offer the
matching Connection Request User
Name and Password. When the
device sends the report to ACS for the
first time, it will contain information for
this.
Periodic Transmission of Inform
Request:
If this function is enabled, the CPE will
frequently report to ACS the status
after a period of time set here. The
default setting is 300 seconds, and the
ISP can modify the value. Generally,
users do not have to change the
settings here.
If this function is disabled, the CPE will
only report once when the connection
between ACS and the device has
been set up.
Identify the Validation of Certificate from ACS
When using SSL protocol to connect to ACS, a trusted CA and synchronic time
setting with the server are used to identify the validation of the Certificate sent from
ACS.
When choosing with SSL for Connect
to ACS, you will see a paragraph
appear on the bottom of the window
(as shown in the right column).