Filter
Top Products
Appendix B: Client Setup for 802.1x, WPA, and WPA-PSK
153
Enabling 802.1x Authentication and Security
1. Click Run from the Start menu.
Type services.msc and click OK.
2. Scroll to the bottom of the list.
Double click on the Wireless
Zero Configuration service and
verify that it is set to Automatic
and that it is Started. Click OK to
continue.
3. Click the Start button, select
Control Panel, then Network
Connections.
4. Right click on your wireless
network card and select
Properties. Click on the
Wireless Networks tab.
5. Click Add to continue.
6. Select the Association Tab, and
enter the SSID of the AP. (e.g.,
Please)
7. Set Open as the Network
Authentication from the drop
down menu, and WEP for Data
encryption.
8. Click OK, and then select the
Authentication Tab.