Filter
Top Products
Chapter 5: Troubleshooting
143
Chapter 5: Troubleshooting
If the suggested solutions in this section do not resolve your issue, contact your
system administrator or Internet service provider.
Problems with LAN
PCs on the LAN cannot get IP addresses from the Wireless IAD.
The chances are that the interface used as DHCP server is modified and the client
PCs do not renew IP addresses.
If your DHCP server is enabled on Private IP Address previously and you modify the
interface to Public IP Address, the client PCs should renew IP addresses.
The PC on the LAN cannot access the Web page of the Wireless IAD.
Check that your PC is on the same subnet with the IAD.
Problems with WAN
You cannot access the Internet.
Check the physical connection between the IAD and the LAN.
If the LAN LED on the front panel is off or keeps blinking, there may be problem
on the cable connecting to the IAD.
Ping the IP address of the IAD at the DOS prompt, e.g., ping 192.168.1.1. If the
following response occurs:
Reply from 192.168.1.1: bytes=32 time=100ms TTL=253
Then the connection between the IAD and the network is OK.
If you get a failed ping with the response of:
Request timed out
Then the connection is fail. Check the cable between the IAD and the network.
Check the DNS setting of the IAD.
At the DOS prompt, ping the IP addresses of the DNS provided by your ISP.
For example, if your DNS IP is 168.95.1.1, then ping 168.95.1.1. If the following
response occurs:
Reply from 168.95.1.1: bytes=32 time=100ms TTL=253
Then the connection to the DNS is OK.
If you get a failed ping with the response of:
Request timed out
Then the DNS is not reachable. Check your DNS setting on the IAD.