Filter
Top Products
3
Port Information View
3-47
Using Web Tools
Table 3-20 describes the fields in the Bypass dialog box.
Enable Dialog Box You can use the Enable option to enable an AL_PA on the loop port
that was previously bypassed. To access this option, from Port
Information View, click Enable on the Loop tab.
Figure 3-21 Enable Dialog Box
Table 3-21 describes the fields in the Enable dialog box.
Table 3-20 Bypass Fields
Field Description
AL_PA to Bypass Specifies the AL_PA number to bypass.
Do not bypass the last AL_PA on the loop, as this will put it
into a loopback state, requiring a reboot to return it to an
L-Port state.
Apply Bypasses an AL_PA on the loop port (must be a valid AL_PA).
Close Closes the Bypass dialog box.
Table 3-21 Enable Fields
Field Description
AL_PA to Enable Specifies AL_PA to be enabled. Entering oxff enables
all the AL_PAs in the loop.
Apply Enables the AL_PA (must be valid AL_PA).
Close Closes an AL_PA window.