4
QuickLoop Administration
4-17
Administrative Interface
Table 4-8 describes the fields on the QuickLoop Administration tab:
Table 4-8 QuickLoop Administration Fields
Field Description
Enable Switch for
QuickLoop Mode
Enables switch for QuickLoop; check off to disable
switch for QuickLoop.
Port No Displays the port number.
QuickLoop Port
Enabled
Enables QuickLoop on port; check off to disable
QuickLoop on port.
QuickLoop Ports
Bypassed
If checked, indicates a port is currently bypassed.
Current QuickLoop
Partner
Displays the current partner switch WWN, domain ID,
and switch name of a dual-switch QuickLoop.
Select a QuickLoop
Partner for this
Switch
Selects a switch from the list of switch names currently
in the fabric as the partner switch of a dual-switch
QuickLoop.
Submit Applies changes made.
Reset Resets all fields to values present when QuickLoop
Administration was launched.
AL_PA Bitmap (in
hexadecimal)
Displays the AL_PA bitmap at the end of a QuickLoop
initialization.
Local AL_PAs Lists the AL_PAs of devices connected to the local
switch.
Remote AL_PAs Lists the AL_PAs of devices connected to the remote
switch if dual-switch QuickLoop is configured.