Filter
Top Products
4
User Administration
4-9
Administrative Interface
Reboot Switch
Use Reboot Switch to reboot or fast boot the switch. POST (Power On
Self Test) can also be disabled for future reboots.
To access Reboot Switch, click the Reboot Switch tab from any
Administration function.
Figure 4-5 Reboot Switch
Password Required for FTP Enters a password if FTP was selected as the protocol. The rsdh
daemon must be running if
rsh is selected. When running a
Windows host, you must manually start the
rshd.exe utility,
which is available from EMC Technical Support.
Download Firmware Downloads firmware.
Reset Resets all fields to values present when Firmware Upgrade was
launched.
Table 4-3 Firmware Upgrade Tab (continued)