Filter
Top Products
3
3-36
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Configuring an EMC Boot Device
Replacing a Boot HBA
If a boot HBA fails, you can replace it with a new one as described in
this section.
EMC Symmetrix
Follow the procedure under Configuring a Symmetrix Boot Device.
EMC CLARiiON
◆ Shut down and power off the server.
◆ Replace the HBA in the identical location and reconnect cabling.
◆ (Fabric configuration only) Repeat the procedure under Preparing
the Fabric on page 3-19, and replace the old HBA’s WWPN with
the new HBA’s WWPN.
◆ Repeat the procedure under Verifying HBA Driver and Digital
Signature Installation on page 3-28.
QLogic_Windows.book Page 36 Thursday, March 10, 2005 10:31 AM