Filter
Top Products
4
Using the QLogic iSCSI SANSurfer Application to Configure iSCSI Devices
4-7
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
which host to connect to. Assuming you are running the software on
the server with the HBA(s) installed, keep the default name of “local-
host” as the host name, and click Connect.
On the GUI, the left pane displays discovered iSCSI HBAs. Click on
the desired HBA in order to change its settings. The GUI defaults to
the HBA Options dialog selected with the row of tabs at the top.
From the HBA Options dialog, you can set the iSCSI HBA parame-
ters including IP address, subnet mask, and gateway. If an iSNS
server is being used for your iSCSI configuration follow the proce-
dure for setting up iSNS later in Configuring iSNS settings for QLA4010
on page 4-8.
QLogic_Windows.book Page 7 Thursday, March 10, 2005 10:31 AM