Emerson Series 600T Power Supply User Manual


 
General System Information
7
1.2.2 Features and Benefits
The Liebert FS provides clean constant DC output to the DC bus, at the user-selected, regulated volt-
age, until the stored energy is depleted. See Figure 5 for a graphic representation of the performance
power and duration curves of single and paralleled unit combinations.
Key Technological Features
Active magnetic bearings
Internal, integrated vacuum system
Synchronous reluctance motor-generator
Fiber composite flywheel
Unique patented safety system
Key Customer Benefits
High reliability
Significantly increased power supply reliability
Low total cost of ownership
Operational flexibility
Environmentally friendly
Easy to install and easy to operate.
Low standby losses
Small footprint
Lightweight
Reliable, cost effective power systems for UPS ride-through needs
1.2.3 Applicable Standards and Certification
For distribution in North America, the Liebert FS is listed to the following Underwriter’s Laboratory
(UL) applicable requirements:
UL 508, Standard for Safety for Electrical Industrial Control Equipment;
UL 1004, Standard for Safety for Electric Motors;
UL 1248, Standard for Safety for Engine-Generator Assemblies;
The Liebert FS is designed in accordance with the applicable sections of the requirements published by:
National Fire Protection Association (NFPA)/National Electric Code (NEC)
National Electrical Manufacturer's Association (NEMA)
Occupational Safety & Health Administration (OSHA)
The Liebert FS is also listed to the following Canadian Standards as determined by UL (cUL):
CSA-C22.2 No. 100-04, “Motors and Generators,”
CSA-C22.2 No. 14-95, “Industrial Control Equipment,”
The "Uniform Building Code (UBC) Zone 4" certification requirements.