Emerson Series 600T Power Supply User Manual


 
General System Information
8
For distribution in Europe, the Liebert FS is CE-marked and meets the applicable requirements of
the following European directives:
“Low Voltage Directive” 73/23/EEC and its amendments by the directive 93/68/EEC;
“Machinery Directive” 98/037/EEC and its amendments by the directive 98/79/EEC;
IEC/EN 60439-1:1999—”Low-voltage switchgear and control gear assemblies Part 1: Type-
tested and partially type-tested assemblies”
IEC/EN 60204-1:1997—”Safety of machinery - Electrical equipment of machines Part 1: Gen-
eral requirements”
EN 1127-1:1997—”Explosive atmospheres: Explosion prevention and protection Part 1: Basic
concepts and methodology”
Machinery Directive Annex 1—”Essential Health and Safety Requirements Relating to the
Design and Construction of Machinery and Safety Components”
“Electromagnetic Compatibility (EMC) Directive” 89/336/EEC and its amendments by the direc-
tives 92/31/EEC and 93/68/EEC.
Figure 5 Liebert FS DC power duration for one or multiple units in parallel
The Liebert FS is integrated into UPS systems as shown in Figures 2 through 4 and Figures 6
and 7.
1900 kW-sec delivered
GT model, 510 VDC, with filter
10 seconds at 190kW (max. power)
@ 510 VDC min
kWb = Refers to Kilowatts on the DC bus of the UPS system
Discharge Voltage = 510VDC