Filter
Top Products
Unloading and Unpacking
13
3.0 UNLOADING AND UNPACKING
3.1 Inspection Before Removal From the Truck
While the Liebert FS shipping package is still on the truck:
• Inspect the equipment and shipping container(s) for any signs of damage or mishandling. Check
also if the shock and tilt gauges (installed for shipping purposes) indicate excessive shock and/or
tilting. If any damage is noted, file a damage claim with the shipping agency within 24 hours and
contact your local sales representative or Liebert at 1-800-LIEBERT to notify them of the damage
claim and the condition of the equipment.
• Compare the contents of the shipment with the bill of lading. Report any missing items to the car-
rier, your local Liebert representative and Liebert at 1-800-LIEBERT immediately. Please have
the bill of lading available.
3.2 Unloading
Figure 8 Liebert FS shipping package
The FS as shipped (see Figure 8) can weigh up to 1,462 lb. (663kg). It must be handled with care. It
must be kept upright—pay special attention to the arrows, which indicate the upright position.
NOTE
All drawings referred to in this section are in Appendix D.0 - Installation Drawings.
!
CAUTION
Do not attempt to install the system if damage is apparent.
76"
(1933mm)
Front View
Side View
Shipping Support
Bands
(on either side)
Metal
Support
Plates
(one on
either side)
Shipping Weight:1462 lb. (663kg)
Weight, unit only: 1300 lb (590kg)
24"
(610mm)
48"
(1219mm)
Top View
4.4"
(112mm)
45"
(1143mm)
Do not tilt the Liebert FS
more than 15 degrees
from vertical.
14623