Support User Manuals

Enterasys Networks 7H4385-49 Computer Hardware User Manual

Open as PDF

of 92

Gaining Access to Memory Modules

DFE-Platinum Series Hardware Installation Guide B-9

Installing the DRAM SIMM

ToinstalltheDRAMSIMM,refertoFigure B‐6andproceedasfol lows:

1. Withtheconnectorarmssetintheopenposition,inserttheDRAMSIMMbetweenthe

connectorfingersandpushtheDRAMSIMMintotheconnectoruntilthetabsonthe

twoconnectorarmspullintowardsthealignment

notches.

2. PushtheDRAMSIMMfurtherintotheconnectoruntilthetwoDRAMSIMM

alignmentnotchesandthetabsonthetwoconnectorarmslocktheDRAMSIMMinto

place.

3. Reinstallthenetworkexpansionmodule.Referto“InstallingtheNetworkExpansion

Module(NEM)”onpage B‐11forinstructions.

4. Reinstallthesafety

cover.Referto“ReinstallingtheSafetyCover”onpage B‐13for

instructions.

Figure B-6 Installing the DRAM SIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 Connector arms 3 Connector fingers

2 DRAM SIMM 4 Alignment notches (2)

Â

À

À

Á

Ã

Ã

previous next