Filter
Top Products
9033645-01 VH-2402S User Interface 9
Main Menu
The Main Menu is the first screen seen after successfully logging into the
system. Figure 2-2 shows the Main Menu and the accompanying table
describes the Main Menu
.
Figure 2-2. Main Menu
Vertical Horizon Local Management -- VH-2402S
Main Menu
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Selection Description
System Information Menu
System Information Provides basic system description, including contact
information.
Switch Information Shows hardware/firmware version numbers, power status,
and expansion modules used in the stack.
Management Setup Menu
Network Configuration Includes IP setup, Ping facility, HTTP (Web Agent) setup,
Telnet configuration, and MAC address.
Serial Port
Configuration
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen
data refresh interval.
SNMP Configuration Activates traps; and configures communities and trap
managers.
Console Login
Configuration
Sets user names and passwords for system access, as well
as the invalid password threshold and lockout time.
TFTP Download Downloads new version of firmware to update your system
(in-band).
Configuration Save &
Restore
Saves the switch configuration to a file on a TFTP server.
This file can be later downloaded to restore the configuration.
Management
Configuration
Specifies if management access to the switch is available
from all VLANs or restricted to one VLAN.