Filter
Top Products
14 VH-2402S User Interface VH-2402S
Management Setup Menu
After initially logging onto the system, adjust the communication
parameters for your console to ensure a reliable connection (Serial Port
Configuration). Specify the IP addresses for the agent module (Network
Configuration / IP Configuration), and then set the Administrator and User
passwords (Console Login Configuration). Remember to record them in a
safe place. Also set the community string which controls access to the on-
board SNMP agent via in-band management software (SNMP
Configuration). The items provided by the Management Setup Menu are
described in the following sections.
Figure 2-6. Management Setup Menu
Vertical Horizon Local Management -- VH-2402S
Management Setup Menu
Network Configuration ...
Serial Port Configuration ...
SNMP Configuration ...
Console Login Configuration ...
TFTP Download ...
Configuration Save & Restore ...
Management Configuration ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Selection Description
Network
Configuration
Includes IP setup, Ping facility, HTTP (Web Agent) setup, Telnet
configuration, and MAC address.
Serial Port
Configuration
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen
data refresh interval.
SNMP Configuration Activates traps; and configures communities and trap managers.
Console Login
Configuration
Sets user names and passwords for system access, as well as
the invalid password threshold and lockout time.
TFTP Download Downloads new version of firmware to update your system (in-
band).
Configuration Save &
Restore
Saves the switch configuration to a file on a TFTP server. This file
can be later downloaded to restore the configuration.
Management
Configuration
Specifies if management access to the switch is available from all
VLANs or restricted to one VLAN.